Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irvine, CA
Chimney Repair Westminster has served Irvine since 2012, and most of what we see here isn’t the masonry repair you’d expect in older cities. Irvine’s housing stock skews heavily toward factory-built fireplaces and gas log conversions in tract homes, townhomes, and condos built from the late 1960s onward. That means our Irvine work centers on metal flue systems, insert servicing, and chase-cover inspections rather than brick-and-mortar rebuilding. The dry Santa Ana season and months of fireplace inactivity mean debris, nests, and creosote accumulate quietly. Call (877) 358-3706 when you need a chimney company in Irvine that understands these homes specifically.
Why Irvine Homes Are Different
Irvine is a master-planned city, and that shapes nearly every chimney and venting job we take on here. Most homes in villages like Woodbridge, Northwood, Westpark, and Vanguard were built after the 1970s, which means factory-built fireplaces with metal flues are the norm, not the exception. Masonry chimneys are relatively rare. What we do see often are original metal flues in older tracts like Woodbridge and Deerfield that are now forty-plus years old and reaching the end of their service life.
The climate matters too. Irvine’s mild, dry Mediterranean weather means fireplaces sit unused for six to eight months a year. During that downtime, birds nest in flue terminations, debris collects on chase covers, and whatever creosote existed from last season hardens. Then the Santa Ana winds kick up, driving leaves, twigs, and occasionally embers into open or poorly capped flues. None of this announces itself. It’s discovered during inspection.
HOA reality is another Irvine-specific factor. Many of our appointments in condo and townhome communities require authorization to access roofs or side-yard chases through common areas. Scheduling ahead matters, especially in late September and October when homeowners suddenly want fireplaces ready for the first cool night. We plan for HOA access delays, and we tell you exactly what we need before we arrive.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Irvine Services
Irvine homeowners call us most often for two things: chimney and fireplace cleaning, and dryer vent cleaning. Both are fire-safety services, and both are jobs you can schedule in a single visit.
Chimney Sweep in Irvine
Most Irvine fireplaces are factory-built units with metal flues, which require a different cleaning approach than traditional masonry chimneys. We remove creosote and debris from the flue, check the termination cap, and inspect the visible portions of the chase and firebox. In Irvine’s mild climate, birds and debris accumulate during the long off-season, so we look carefully at what’s collected at the top of the system. If your home is in Woodbridge or another older village with an original metal flue, a sweep is also the right time to evaluate whether the liner is still sound. See Chimney Sweep in Irvine for full details on that service.
Dryer Vent Cleaning in Irvine
Dryer vents accumulate lint, and in Irvine’s tract homes and condo layouts, those vent runs are often long, with bends that trap debris. We clean the entire run from dryer to exterior termination, verify airflow, and check that the termination damper opens and closes properly. It’s a service most chimney companies don’t offer, but lint-clogged dryer vents and dirty fireplace flues are both leading contributors to residential fires. The same team handles both. Read more about Dryer Vent Cleaning in Irvine including what we check and how often it should be done.
Chimney Repair in Irvine
Chimney repair in Irvine most often means repairing or replacing components on factory-built fireplace systems: metal flues, chase covers, caps, and terminations. Homes built in the 1970s and 1980s, particularly in Woodbridge and Deerfield, are now showing their age, and original metal flues don’t last forever. Moisture intrusion at the top of the system is the usual starting point, and Irvine’s dry climate doesn’t prevent it, it just slows how quickly you notice it. A chase cover or cap that’s been leaking for several seasons often corrodes the flue below it. At Chimney Repair Westminster, we diagnose what we find and fix it on the same call when possible. Our Chimney Repair service covers everything from caps to full liner replacement.
Chimney Cap Installation
Signs you need it
Water stains on the ceiling near the chase, debris falling into the fireplace, or visible rust on the termination point.
What it costs in Irvine
Chimney cap installation in Irvine typically runs $190 to $410 depending on the cap type, the flue size, and roof access through Irvine’s HOA-coordinated common areas.
How we do it
We inspect the flue termination, measure the flue dimensions, secure the appropriate cap with mechanical fasteners, and confirm the cap’s mesh and hood are correctly seated.
Chimney Cap Replacement
Signs you need it
A rusted-through cap, missing spark arrestor mesh, or a cap that’s been displaced by Santa Ana wind gusts.
What it costs in Irvine
Chimney cap replacement in Irvine typically runs $190 to $410, since we’re removing the old cap, disposing of it, and securing a new one matched to your flue dimensions.
How we do it
We remove the damaged cap, clean the flue termination surface, and install a correctly sized replacement cap with new fasteners.
Chimney Liner Installation
Signs you need it
Crumbling flue tiles, visible gaps between tile sections during a camera inspection, or an inspection finding that the flue is no longer safe to use.
What it costs in Irvine
Chimney liner installation in Irvine typically ranges from $2,250 to $5,700, influenced by flue height, access through the roof, and whether we’re resurfacing or installing a new flexible liner.
How we do it
We start with a camera inspection to confirm what’s needed, then either install a DuraFlex flexible liner system or apply HeatShield ceramic resurfacing to restore the existing flue, depending on condition and access.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chase intersection, damp drywall, or visible gaps in the flashing where the chase meets the roofline.
What it costs in Irvine
Chimney flashing repair in Irvine typically runs $390 to $850, rising if roof access requires HOA authorization or if the surrounding roof material needs to be worked around carefully.
How we do it
We inspect the flashing seam, remove failed sealant, reposition or replace damaged flashing sections, and seal the transition with roofing-grade material.
What Chimney Repair Costs in Irvine
| Item | Typical range in Irvine |
|---|---|
| Chimney cap installation | $190 – $410 |
| Chimney cap replacement | $190 – $410 |
| Chimney flashing repair | $390 – $850 |
| Chimney liner installation | $2,250 – $5,700 |
Do I need a new liner if I convert to gas logs in Irvine?
Not always, but many Irvine gas log conversions were done without relining the flue. If your metal flue predates the conversion or shows corrosion from gas exhaust condensation, a liner may be required. We camera-inspect and show you the footage. Call (877) 358-3706 for an exact assessment.
Can you repair a factory-built fireplace in an Irvine condo?
Yes, most components on factory-built units are replaceable: caps, chase covers, refractory panels, and liners. We coordinate with your HOA for access to roof lines and common areas. Same-day repair is possible when parts are in stock. Call (877) 358-3706 to schedule.
Brands We Service in Irvine
We install and service components from Copperfield, DuraFlex, HeatShield, and Gelco. These are chimney-industry supply brands, not hardware-store substitutes, and we stock common Irvine sizes locally. That keeps turnaround reasonable when a cap or termination needs replacing. See our brands for the full list of what we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irvine, CA
| Service | Typical range in Irvine |
|---|---|
| Chimney cleaning (sweep) | $165 – $285 |
| Chimney inspection | $125 – $325 |
| Chimney cap installation | $190 – $410 |
| Chimney cap replacement | $190 – $410 |
| Chimney flashing repair | $390 – $850 |
| Chimney liner installation | $2,250 – $5,700 |
| Dryer vent cleaning | $125 – $240 |
| Fireplace repair | $180 – $750 |
| Chase cover replacement | $280 – $800 |
What pushes chimney prices up in Irvine is the age and configuration of factory-built systems. Original metal flues in 1970s and 1980s tracts often need more than a basic cap swap once we get a camera in. We give you a flat price before the work begins, and nothing is recommended without camera evidence you can see yourself.
Neighborhoods We Serve in Irvine
We work throughout Irvine’s villages and newer construction areas, and we’re familiar with HOA access requirements in each. Most appointments in Irvine can be scheduled within a few business days, though HOA-coordinated roof access may add lead time in condo and townhome communities.
- Woodbridge
- Northwood
- Westpark
- Vanguard
- Great Park
Service Area – Cities Near Irvine
Beyond Irvine, our service area includes several surrounding Orange County cities. We work regularly in Santa Ana, CA, Costa Mesa, CA, Newport Beach, CA, and Fountain Valley, CA. If you’re nearby and need chimney or dryer vent work, one call covers the whole area.
Serving Irvine, CA – Our Local Coverage Area
We’re based in the Irvine area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irvine
Most Irvine appointments are scheduled within a few business days. HOA-coordinated roof or common-area access can add lead time in condo and townhome communities, so we recommend booking before the first cold stretch rather than during it. Call (877) 358-3706 to check current availability.
Often yes, especially in Irvine’s many HOA-governed villages where roof access crosses common areas or side-yard chases are shared. We’re used to the process and will tell you exactly what authorization we need before arriving. It’s routine for us, not a complication.
Yes, and that’s one reason Irvine homeowners schedule us. Chimney sweep, chimney repair, and dryer vent cleaning are all handled by the same team, so we can address both major residential fire-hazard sources in a single call. Booking is straightforward. Call (877) 358-3706 for a free estimate.
If you’re in Irvine and need a chimney company that understands factory-built systems, HOA access, and what decades of dry-season accumulation does to a flue, call Chimney Repair Westminster at (877) 358-3706. Estimates are free, and we’ll tell you plainly if something can wait or needs attention now.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irvine Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Eduardo Delgado"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Marco Torres"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Alma Reyes